Makers Tote Class

$50.00

Makers Tote Class

Instructor: Cynthy Kram

Date: Saturday October 12

Time: 10:30am-2:30pm

Supplies:

Pattern: Maker’s Tote by Noodlehead

Fabric requirements: Large Tote

5/8 yard Exterior fabric 

1 ¼ yards Lining fabric

1 ¼ yard Pocket fabric

½ yard Accent fabric

1 ½ yards Fusible Woven interfacing (SF101 Shapeflex)

1 yard Fusible Mid-weight interfacing (Décor bond)

½ yard ByAnnie’s Soft and Stable 

18” separating zipper 

10” non-separating zipper for outside pocket

 

Fabric requirements: Small Tote

½ yards Exterior fabric 

1 yards Lining fabric

1 yard Pocket fabric

½ yard Accent fabric

1 ½ yards Fusible Woven interfacing (SF101 Shapeflex)

1 yard Fusible Mid-weight interfacing (Décor bond)

½ yard ByAnnie’s Soft and Stable 

14” separating zipper 

7” non-separating zipper for outside pocket

 

 

Sewing machine in good working condition, bring quilting foot and zipper foot

Basic sewing supplies: scissors, pins, seam ripper, etc.

Thread in matching colors to fabrics

Rotary cutter and rulers

Fabric marking pencil (water soluble or heat removable)

Hand sewing needles 

Washable glue stick

Magnetic snap (optional for outer pocket)

Binder Clips 

Pre-cutting directions are “Large tote (small tote)”, dimensions are listed as height x width. Make sure to cut correctly if you want a directional fabric to go a certain direction.

Exterior fabric: Cut 2 – 17” x 16” (14” x 12”) Main

Lining fabric: Cut 2 – 17” x 16” (14” x 12”) Main

  Cut 4 – 11” x 8” (8 ½ x 7) End Gusset

Cut 2 – 7” x 10” (6” x 8”) Front Pocket

Pocket fabric: cut 2 – 9” x 16” (7” x 12”) Interior Slip Pocket

Cut 2 – 9” x 22” (7” x 18”) Pleated Pocket

Cut 1 – 16” x 11 ½” (15” x 8 ½”) Zipper Pocket Lining

Accent Fabric: Cut 2 – 6” x 17” (5” x 14”) Handle

Cut 2 – 1 ¼” x 16” (1 ¼” x 12”) Zipper Binding

Cut 5 – 2” wide bias cut strips. 

        See pattern for cutting this fabric to be able to cut the bias strips correctly or bring to class.

Fusible Woven Interfacing (SF101)

Cut 1 – 9” x 16” (7” x 12”) Slip Pocket

Cut 1 – 9” x 22” (7” x 18”) Pleated Pocket

Cut 1 – 7” x 10” (6” x 8”) Front Pocket

Cut 2 – 6” x 17” (5” x 14”) Handle

Fusible Mid-Weight Interfacing

Cut 1 – 33” x 16” (27” x 12”) Main

Cut 2 – 10 ½” x 8” (7 ¾” x 7”) End Gusset

Soft and Stable Flex Foam

Cut 1 – 33” x16” (27” x 12”) Main

 

 *Bring all remaining fabrics to class in case of you may need them. 

  

You may arrive as early as 30 minutes before class to get set up and ready to begin.

Please park in the “free parking” lot at the end of downtown on the right.  You may pull up in front of studio to unload, then move vehicle to lot.